Here is a chirp .img file for the QYT KT8900D. included are local repeaters as well as some GMRS simplex frequencies, and a GMRS repeater frequency. DO NOT USE GMRS FREQUENCIES WITHOUT A GMRS LICENSE. AND DO NOT USE GMRS REPEATERS WITHOUT PERMISSION.
https://drive.google.com/file/d/1zbMG4yXiRCKj06TSIrqT1OHLushF3QqJ/view?usp=sharing
Courtesy of Paul, KC4VDZ. See below:
https://drive.google.com/drive/folders/1Qbq_223OsCUD9ZMkvG3jhC1Y_mPumuMB?usp=sharing
Attached is a Chirp ".img" file (HVARC_BF-F8HP_20250707 base image.img) that contains 40+ frequencies from central Virginia. Since this is for the Baofeng that has such a wide open receiver without good selectivity, I only included repeaters that transmitted a tone (with a handful of exceptions), so that the user wouldn't be frustrated if the system transmitted a "data stream" or picked up other spurious noise. In almost all cases, I set the receiver to "Tone Squelch - TSQL" in the Baofeng. The filename says BF-F8HP, but it will work with any radio and Chirp when imported as the instructions below state.